RH3 Type Volumetric Distributor

The RH3 runs on oil or grease, and further outlets can be added as a machine's point count grows.

Dimension

Operating Principle

(1) At interval

(2) At measurement of main tube pressure increase.

(3) Measurement completed

(4) Oil being discharged

(5) Oil discharge completed

a. Measuring piston travel

b. Travel of umbrella-shaped double-side valve

As shown in the diagram above, oil delivered from the lubrication pump is injected via the main tube and pushes open the umbrella-shaped double-sided valve B, flowing in and pressing into piston chamber F via path C. Driven by the pressurized oil, the measuring piston moves downward and spring G compresses, accumulating pressure. Measurement and oil accumulation are now complete.

When oil pressure inside main tube A is relieved (taken off), the umbrella-shaped valve moves downward under the pressure difference and opens outlet E. The measured and accumulated oil inside the piston chamber then enters oil tube H via outlet E and is fed to the lubrication points. Signal pin I extends while measuring and accumulating oil, and retracts while feeding oil to the lubrication points, so the distributor's operating condition can be confirmed at a glance.