Product catalogue
Every Herg pump, distributor and accessory we supply in India. Prices and availability on enquiry.
-
34 Type Volumetric Distributor
The 34 type pressurized volumetric distributor injects a metered dose of oil as line pressure rises, then refills as pressure drops.
Distributors -
35 Type Volumetric Distributor
The 35 type pressurized volumetric distributor injects a metered dose of oil as line pressure rises, then refills as pressure drops.
Distributors -
AP Type Automotive Chassis Lubrication Pump
The AP type is a low-voltage grease pump for centralised chassis lubrication on vehicles, running directly from a 12V or 24V DC vehicle supply. It has a 3 L polycarbonate reservoir, a built-in pressure take-off mechanism and a level switch, and is rated IP55 for use under a chassis.
APLubrication Pumps -
BM Type Cycloidal Pump
The BM series cycloidal pump has a simple construction and delivers oil at a steady rate.
BMLubrication Pumps -
DK Type Single-Line Metering Distributor
Single-line metering distributor delivering a fixed dose of oil or grease per outlet each cycle, in six sizes from DK-05 to DK-50.
DKDistributors -
Filter
Inline filter that traps contaminants from the oil or grease before it reaches the distributor, keeping fine metering orifices from clogging.
Accessories -
GM Type Grease Lubrication Pump
The GM type motor-driven grease pump serves medium and small machinery, delivering grease at a rated output pressure of 35 kgf/cm² through progressive, volumetric or resist-type distributors.
GMLubrication Pumps -
HL Type Oil Lubrication Pump
The HL type motor-driven lubrication pump is a gear pump in special alloy steel, easy to install and wire, with good self-priming and a high volumetric flow rate.
HLLubrication Pumps -
NKGH Manual Grease Pump
The NKGH manual grease pump feeds grease to a resist-type or progressive distributor through the reciprocating action of its handle, delivering grease to each lubrication point.
NKGHLubrication Pumps -
NKHY Manual Oil Pump
The NKHY pull-type oil pump suits single-line resist-type lubrication systems, metering and delivering oil in proportion to each lube point.
NKHYLubrication Pumps -
Nylon Lubrication Tube
PA11 and PA12 nylon tube for running oil or grease from a pump or distributor to the lubrication point, self-lubricating and resistant to oil, water and weak acids and alkalis.
Accessories -
Oil Level Indicator
Mounted on the reservoir to give a visual read of the oil level, so a refill is never left until the pump runs dry.
Accessories -
Pressure Gauge
Reads the operating pressure of the lubrication line at a glance, so a blocked line or a failing pump is caught before it causes damage.
Accessories -
Pressure Switches
Trips at a preset pressure to flag a blocked line or a failed pump, feeding an alarm back to the machine's control panel.
Accessories -
RH3 Type Volumetric Distributor
The RH3 volumetric distributor is developed and refined from the earlier RH2 generation, delivering a dosed amount of oil to each lubrication point according to the measured cycle.
Distributors -
SD2 Type Progressive Grease Distributor
The SD block-type progressive distributor is compact and modular, rated for high pressure and a wide operating-temperature range.
Distributors -
TCJ and TCZ Resist Type Distributor
The TCJ/TCZ resist-type proportioning distributor has a built-in filter screen and single-side valve, controlling flow through a damping orifice.
Distributors -
TH Type Joint Fitting
Branch manifold fitting that joins a pump to a distributor, or a distributor onward to the machine, in 2 to 10 outlets with M8 x 1 or M10 x 1 threads.
THAccessories -
TM Type Automatic Intermittent Lubrication Pump
The TM type automatic intermittent lubrication pump runs on a synchronous timer motor, delivering a measured dose of oil at a fixed interval without any external controller. Discharge is adjustable at the pump, and the TMS variant offers the same output in a smaller reservoir for compact machinery.
TMLubrication Pumps -
TZ Type Oil Lubrication Pump
The TZ type motor-driven lubrication pump is a gear pump in special alloy steel, easy to install and wire, with good self-priming and a high volumetric flow rate. It is available with reservoirs to suit, and customizable to the customer's requirement.
TZLubrication Pumps -
ZD Type Medium Pressure Grease Pump
The ZD type medium-pressure piston grease pump is built for a wide range of grease-lubrication requirements. It shares the lubrication characteristics of the I-type motor-driven piston grease pump and adds a vehicle-mounted controller (remote controller optional). Rated output pressure is 180 kgf/cm².
ZDLubrication Pumps -
ZJ Type High Pressure Grease Pump
The ZJ series high-pressure piston grease pump accepts up to two outlets working separately, each with its own piston mechanism.
ZJLubrication Pumps
Need a quote or a distributor?
Tell us the machine, the lubricant and the number of lube points, and we'll come back with the right pump and distributor combination.